A'PEXi Original Accelerator Controller with 7 modes (3 ECO Modes, 2 Boost Modes, Lo-Throttle Mode, and Hi-Throttle Mode)

The A'PEXi SMART Accel Controller offers instant and direct throttle response for vehicles equipped with Electronic Throttle Control (ETC) Systems. Throttle response that is delayed from ETC, or better known as Drive-by-wire throttle, is greatly improved with this simple unit and a vehicle-specific plug-and-play harness installation, which is connected between the factory accelerator pedal sensor and wiring harness within a few minutes.

ECO Mode: There are 3 ECO Mode options. Throttle response time will be delayed compared to the factory throttle, simulating the accelerator pedal being pressed gently, which can result in fuel economy efficiency due to decreased initial load from the output of the accelerator pedal, and in some cases can reduce fuel consumption by up to 10%.

• Lo-Throttle Mode: Throttle response will be delayed from normal mode based on the throttle pedal percentage range. The throttle will react to how the user presses on the pedal between the idle-to-full throttle range.
• Boost Mode: Throttle response time will become quicker and resulting in improved accelerator pedal feel. Returns to normal mode once the pedal is pressed to fully open the throttle.
• Hi-Throttle Mode: Improved throttle response based on throttle percentage range, in this mode throttle will respond as if depressing the pedal in full throttle. Returns to normal mode once the pedal is pressed to fully open the throttle.

The Reverse-Gear cancel harness is an added safety feature that is an installation option to revert to the factory throttle setting when reversing the vehicle

Full-Color A'PEXi Logo LED Switch in 7 different colors per mode

Requires SMART Accel Controller Vehicle Specific Harness for installation and use

*CAUTION* - Not compatible and may not work in conjunction with other Aftermarket Throttle Response related products: (ie: OBD2 module, chip, tuners, etc.)