The HKS Turbo Kit for the 2017+ Toyota 86, 2013+ Subaru BRZ, & 2013-2016 Scion FR-S was designed and engineered to add a significant power bump to the ZN6/ZC6 chassis. It is a 100% bolt-on kit that has been shown to provide ~350 hp with a stock FA20. The kit can be used on its own or paired with other upgrades for more power (the built motor is tested to ~450 hp).

The kit includes all the necessary hard parts for installation. You will need to purchase engine management separately (piggyback or stand-alone), larger injectors are necessary (440cc or higher recommended), and upgrade the (for 3 BAR boost) pressure sensor.

*This kit can be used with HKS S-TYPE OIL COOLER KIT.
※OIL COOLER KIT is NOT included in this kit.

FEATURES:

• Dedicated GTIII-RS turbocharger assembly (internal wastegate)
• All necessary oil and water lines
• HKS Power Flow Intake Parts
• Turbo Manifold (Exhaust Manifold) with catalyzer-less down pipe
• Necessary heat shielding
• Gaskets, nuts, bolts and all necessary hardware for installation

NOTES:

• Another kit, including the extension with CAT, is additionally available.
• Reinforced fuel parts, such as injectors, are required.
• Tuning is required.
• A pressure sensor is required separately.
• Engine management parts are not included in this kit.
• Resetting is required.
• Vehicle modification is required to install this kit (Refer to the separate information).
• A reinforced clutch is required to avoid slippage of the clutch disk that may occur due to a significant torque characteristic change.
• It is strongly recommended to install an oil cooler to protect the engine
• CATless Extension, Compatibility with the late-model is confirmed only with the JDM model
• PICTURES MAY DIFFER FROM THE ACTUAL PRODUCT

GTIII-RS Bolt-On Turbo Kit with Catless Extension for BRZ/FR-S/86 by HKS - Catted Version 11001-AT005